Upgrade iPhone X, Xr,11 To iPhone 12
iPhone 12 series have been launched for quite a while,and many people believe that getting them at this time is not the best idea. Talk is talk, holding a new iPhone in hands still feels nice.
For those feel the same way and the digital fanciers we made this step-by-step tutorial in which they’ll find how to upgrade the old versions of iPhone including iPhone X, XR and 11 to the latest iPhone 12.
Materials we need
1 Your iPhone you wish to be upgraded (only iPhone X, XR and 11)
2 The special back cover for upgrading
3 SIM card tray
4 battery adhesive
5 Tools kit
Tearing Down The Phone
Heat it up
Let go off the battery
Take down the cover bracket to remove the rear cameras
Disconnect the flex cable port and the dismantle the motherboard carefully with a tweezer
Screw off the SIM card reader
Disconnect the volume bottom flex cable, the bottom speaker and the charging port flex cable
Heat up the wireless charging coil to slighytly melt the adhesive
Remove the coil slowly
Installation Part
Apply adhesive around the wireless charging coil
Tirm it on the corresponding place
Remove the volume button flex cable
Take down the sub-microphone onto this new shell
Connect the iPhone 11 WIFI flex cable and the charging port flex cable
Install the speaker, the SIM card tray and the power switch flex cable
Install and fix the cover bracket and its motherboad
Trim the screen adhesive
Bolt the screws on the charging port part
So far the screen installation is done. Turn on the phone, get into the settings, it says iPhone 11.
Install SIM card and card slot, signal display on the top right of the screen turns out to be normal.
Next we text its functions. WI-FI works well, Bluetooth and data network are good. Volume button
and vibrating perform well. Front and rear cameras operate normally
